PeakTech 1640 Bedienerhandbuch Seite 25

* Opening the equipment and service – and repair work must
only be performed by qualified service personnel
* Measuring instruments don't belong to children hands.
1.1. Safety information
Caution! Refer to accompanying documents.
Caution! Risk of electric shock
Equipment protected
insulation (class II)
Alternating current
Direct current
Ground
However, electrical noise or intense electromagnetic fields in the
vicinity of the equipment, may disturb the measurement circuit.
Measuring instruments will also respond to unwanted signals
that may be present within the measurement circuit. Users
should exercise care and take appropriate precautions to avoid
misleading results when making measurement in the presence
of electromagnetic interference.
2. Introduction
2.1. Unpacking and inspection
Upon removing your new digital clamp meter from its packing,
you should have the following items:
Digital clamp meter,
Test lead set
9-V battery (installed in meter)
Carrying case
Instruction manual
throughout by double
-24-