Scheppach HC06 Original Bedienungsanleitung Seite 49

Please provide the following information in the event of any enquiries:
• Type of current for the motor
• Machine data - type plate
• Machine data - type plate
10. Cleaning, maintenance, storage and transport
m Important!
Pull out the power plug before doing any cleaning and mainte-
nance work on the equipment. Risk of injury from electric shock!
m Important!
Wait until the equipment has cooled down completely! Risk of burns!
m Important!
Always depressurize the equipment before carrying out any cleaning
and maintenance work! Risk of injury!
10.1 Cleaning
• Keep the equipment free of dirt and dust as far as possible. Wipe the
equipment with a clean cloth or blow it down with compressed air at
low pressure.
• We recommend that you clean the equipment immediately after you
use it.
• Clean the equipment regularly with a damp cloth and some soft soap.
Do not use cleaning agents or solvents; these may be aggressive to
the plastic parts in the equipment. Ensure that no water can get into
the interior of the equipment.
• You must disconnect the hose and any spraying tools from the com-
pressor before cleaning. Do not clean the compressor with water, sol-
vents or the like.
10.2 Maintenance of the pressure vessel (fig. 1, 2)
m Important! To ensure a long service life for the pressure vessel (2),
drain off the condensate after each use by opening the drain screw (1).
Release the vessel pressure at the overpressure valve (12) beforehand.
www.scheppach.com
GB | 49