Scheppach HC06 Original Bedienungsanleitung Seite 41

Safety instructions for compressors
m Attention! The following basic safety measures must be observed
when using this compressor for protection against electric shock, and
the risk of injury and fire.
Read and observe these instructions before using the device.
Safe work.
1. Take care of your tools
- Keep your compressor clean in order to work well and safely.
- Follow the maintenance instructions.
- Check the connection cable of the power tool regularly and have it
replaced by a recognised specialist when damaged.
- Check extension cables regularly and replace them when damaged.
2. Pull the connector out of the socket
- When the power tool is not in use or prior to maintenance and when
replacing tools such as saw blades, bits, milling heads.
3. Check the power tool for potential damage
- Protective devices or other parts with minor damage must be
carefully inspected to ensure that they function correctly and as
intended prior to continued use of the power tool.
- Check whether the moving parts function faultlessly and do not jam
or whether parts are damaged. All parts must be correctly mounted
and all conditions must be fulfilled to ensure fault-free operation of
the power tool.
- Damaged protective devices and parts must be properly repaired
or replaced by a recognised workshop, insofar as nothing different
is specified in the operating manual.
- Do not use any faulty or damaged connection cables.
4. Attention!
- For your own safety, only use accessories and additional
equipment that are indicated in the operating manual or have been
recommended or indicated by the manufacturer. Use of other tools
or accessories that those recommended in the operating manual or
in the catalogue could represent a personal danger to you.
www.scheppach.com
GB | 41