Scheppach DTS215 Original Bedienungsanleitung Seite 28

When sanding certain materials (e. g. lead
paint, certain types of wood and metal)
harmful or noxious dust may be generat-
ed. Touching or breathing in such dust may
imply risks for the operator or bystanders.
Notes regarding vibration and noise
emissions
Reduce noise emissions and vibrations to
a minimum!
1. Only use power tools which are free of
defects.
2. Maintain and clean the power tool on a
regular basis.
3. Adjust your way of working to the pow-
er tool.
4. Do not overload your power tool.
5. Have your power tool inspected, if nec-
essary.
6. Switch off the power tool when it is not
in use.
Remaining risks
Even if you use this power tool in compli-
ance with the regulations, there are still re-
maining risks. The following risks may occur
due to the type and design of the power tool:
a) Damage caused to your health resulting
from hand/arm vibrations if the power tool
is used over a Ionger period of time or if
it is not properly used and maintained.
b) Injury and damage to property caused
by flying off insertion tools which are un-
expectedly expelled from the power tool
due to sudden damage, wear or incorrect
insertion.
c) Burns and cuts if the insertion tools are
touched directly after use and/or with
your bare hands.
m WARNING! This electric tool generates
an electromagnetic field du ring operation
which may impair active or passive medi-
cal implants under certain circumstances.
ln order to reduce the risk of severe or Ie-
thal injury, we recommend that persons with
medical implants consult their doctor and
the manufacturer of the medical implant be-
fore using the power tool.
28 | GB
6. Technical data
Nominal voltage
Nominal frequency
Power consumption
Sanding wheel
nominal speed
sanding disc diameter
sanding paper diameter
Dimensions LxBxH
Extraction hose length
Protection class
Weight
Noise and vibration characteristics
Sound pressure level L
Sound power level L
Uncertainty K
Vibration total value
Vibration main handle a
Vibration auxiliary
handle a
Uncertainty K
Note:
The measured noise levels are determined
according to EN 62841.
Wear hearing protection!
The measured total vibration values (triax
vector sum) are determined according to the
standard EN 62841:
The vibration level specified in this data
sheet has been measured according to
the standard test stated in the standard EN
62841, and it is used to compare the differ-
ent devices.
The level can be used for an initial exposure
assessment. The specified vibration level
applies to the most important applications of
the device.
www.scheppach.com
1500−3200
380x260x260
94,2 dB(A)
PA
102,2 dB(A)
WA
2,409 m/s
h
4,303 m/s
h
230 V~
50 Hz
1200 W
min
-1
210 mm
215 mm
mm
1500 mm
II
3.4 kg
3 dB(A)
2
2
1.5 m/s
2