Parkside Performance PSSAP 20-Li C3 Bedienungs- Und Sicherheitshinweise Seite 82
Vorschau anzeigen
Andere Handbücher für PSSAP 20-Li C3:
Verfügbare Sprachen
Verfügbare Sprachen
The charging control LEDs (green
) indicate the status of the charger
[
]
the battery pack
[
8 ]
LED
Red LED lights up
Green LED lights up
Green and red LED
flashing
Red LED flashing
Green LED lights up
(without battery pack)
Insert the battery pack
charger
.
[
]
Connect the power cord with power plug
of the charger
to the socket.
[
]
When the battery pack
Remove the battery pack from the charger
. Then disconnect the power cord with
[
]
power plug
of the charger from the socket.
[
]
˜ Adjusting the base plate
(Fig. E)
m
WARNING!
Always switch the product off, remove
the battery pack
product cool down before making any
adjustments!
m
CAUTION! RISK OF INJURY!
Saw blades can be sharp and become
hot during use. Always wear protective
gloves when handling saw blades.
and red
[
]
and
[
]
:
Status
Battery pack
charges
Battery pack fully
charged
Battery pack
defective
Battery pack too
cold or too warm
Charger ready
into the
[
8 ]
[
is fully charged:
[
8 ]
and let the
8 ]
[
m
CAUTION! RISK OF INJURY!
Remove the saw blade from the product
u
before adjusting the base plate
(see "Inserting/removing the saw blade").
Do not use the product without having
u
inserted the base plate
To adapt to the workpiece, the base plate
be adjusted and swivelled to different positions.
Unlock the base plate
lever
in a counter-clockwise direction.
[
1 ]
Adjust the desired position of the base plate
by pushing it in or pulling it out.
4 ]
[
Lock the base plate
in a clockwise direction.
1 ]
[
˜ Inserting/removing the saw
]
blade
m
WARNING!
Always switch the product off, remove
the battery pack
product cool down before making any
adjustments!
m
CAUTION! RISK OF INJURY!
Saw blades can be sharp and become
hot during use. Always wear protective
gloves when handling saw blades.
m
CAUTION! RISK OF INJURY!
Do not use any blunt, bent or damaged
u
saw blade.
Always install a suitable saw blade for the
u
job.
[
4 ]
.
[
4 ]
can
[
4 ]
: Turn the locking
[
4 ]
: Turn the locking lever
[
4 ]
and let the
[
8 ]
GB/MT
81
