Parkside Performance PSSAP 20-Li C3 Bedienungs- Und Sicherheitshinweise Seite 74

m
WARNING!
Wear ear protection!
NOTE
The declared vibration total values and
u
the declared noise emission values have
been measured in accordance with a
standard test method and may be used for
comparing one tool with another.
The declared total vibration values and the
u
declared noise emission values may also
be used for a preliminary assessment of
exposure.
m
WARNING!
The vibration and noise emissions during
u
actual use of the power tool can differ
from the declared values depending on the
manner in which the tool is used, especially
what kind of workpiece is processed.
Try to minimise exposure to vibration and
noise. Examples of measures to reduce
vibration include wearing gloves when
using the tool and limiting working time. All
parts of the operating cycle must be taken
into account (e.g. times when the power
tool is switched off and when it is running
idle in addition to the trigger time).
Safety instructions
˜ General power tool safety
warnings
m
WARNING!
Read all safety warnings,
u
instructions, illustrations and
specifications provided with
this power tool. Failure to follow
all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
Keep work area clean and well
1)
lit. Cluttered or dark areas invite accidents.
2) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to lose
control.
GB/MT 73