Parkside Performance PSSAP 20-Li C3 Bedienungs- Und Sicherheitshinweise Seite 81

ATTENTION! This charger is
only designed for charging the
battery pack types:
Parkside 20 V
battery pack
PAP 20 B1
PAP 20 B3
An up-to-date list of battery
compatibility can be found at
www.lidl.de/akku.
˜ Before first use
˜ Accessories
To operate this product safely and correctly, the
following accessories, i.e. tools and saw blades,
are necessary:
Suitable saw blade
Accessories and saw blades are available
through your authorised dealer. When buying
always consider the technical requirements of this
product (see "Technical data").
If you are not certain, ask a qualified specialist
and get advice from your trusted dealer.
NOTE
This instruction manual contains information
u
and suggestions for several saw blades and
their uses. The saw blades depicted are
not necessarily included in the shipment,
but are meant to indicate additional
possibilities for using this product.
80 GB/MT
2 Ah 5 cells
4 Ah 10 cells
Suitable battery packs and chargers
Battery pack: Parkside X 20 V Team
Charger:
Parkside X 20 V Team
˜ Operation
˜ Attaching/removing the
battery pack
Removing the battery pack: Press the
battery pack release button
battery pack (Fig. D).
[ 8 ]
Attaching the battery pack: Align the
battery pack to the handle and slide it into
8 ] [
it. Ensure it clicks noticeably in place.
˜ Checking the battery pack
charging level
(Fig. B)
Check battery pack charge level: Press the
button . The charging level LEDs
[ ]
light up:
LED
[ ]
Red / orange / green
Red / orange
Red
˜ Charging the battery pack
(Fig. C)
NOTE
The battery pack
u
any time without reducing the life.
Interrupting the charging process does not
u
damage the battery pack
Charge the battery pack
when it is at medium or low charging level.
. Remove the
[ ]
[
Charging level
Maximum
Medium
Low
may be charged at
[ 8 ]
.
8 ] [
before operation
[ 8 ]
]