Power Tool Use And Care; Service - Meec Tools 033069 Bedienungsanleitung

EN

1.9 Power tool use and care

● Do not force the power tool. Use the correct power tool for your application. The
SV
correct power tool will do the job better and safer at the rate for which it was
designed.
● Do not use the power tool if the switch does not turn it on and off. Any power tool
NO
that cannot be controlled with the switch is dangerous and must be repaired.
● Disconnect the plug from the power source and/or the battery pack from the
DA
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the power
tool accidentally.
PL
● Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
DE
Power tools are dangerous in the hands of untrained users.
● Maintain power tools and accessories. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may affect the
FI
power tool's operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
FR
● Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
NL ● Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
● Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control of
the tool in unexpected situations.

1.10 Service

● Have your power toll serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
6