Meec tools 033069 Bedienungsanleitung Seite 28

Noise levels
Sound pressure level, L
Measured sound power level, L
Maximum vibrations level
WARNING! Always wear hearing protection!
WARNING! The actual vibration and noise level when using tools may differ
from the specified maximum value, depending on how the tool is used and the ma-
terial. It is therefore necessary to determine which safety precautions are required to
protect the user, based on an estimate of exposure in actual operating conditions (tak-
ing into account all stages of the work cycle, e.g. the time when the tool is switched off
and when it is idling, in addition to the start-up time).
1 The declared values for vibration and noise, which have been measured according
to a standardized test method, can be used to compare different tools with each
other and for a preliminary assessment of exposure. The measurement values have
been determined in accordance with EN IEC 62841-2-3:2021.
pA
WA
1
86 dB(A), K=3 dB
94 dB(A), K=3 dB
9.59 m/s , K=1.5m/s
2
EN
SV
2
NO
DA
PL
DE
FI
FR
NL
17