Scope Of Delivery; Intended Use; Safety Information - Scheppach Mst254 Originalbetriebsanleitung

32b. Screw
33. ON/OFF switch laser
34. Guide bracket
35. Latched position lever
36. Tilt protection
37. Interlock carbon brushes
A.) 90° stop angle (not supplied)
B.) 45° stop angle (not supplied)
C.) Allen key, 6 mm
D.) Allen key, 3 mm
E.) Phillips head screw (Laser)

3. Scope of delivery

• Sliding cross cut mitre saw
• 1 x clamping device (7) (pre-assembled)
• 2 x workpiece support (8) (pre-assembled)
• Sawdust bag (17)
• Allen key 6 mm (C)
• Allen key 3 mm (D)
• Saw blade (mounted)
• Operating manual

4. Intended use

The sliding cross cut mitre saw is designed to crosscut
wood and plastic respective of the machine's size. The
sliding cross cut mitre saw is not designed for cutting fire-
wood.
Warning! Do not use the sliding cross cut mitre saw to cut
materials other than those specified described in manual.
Warning! The supplied saw blade is intended exclu-
sively for sawing the following materials:
wood, wood-derived products (MDF, chipboard, ply-
wood, blockboard, hardboard, etc.), wood with nails
and 3 mm mild steel plates.
Note: Wood containing non-galvanised nails or screws
can also be safely cut when carefully handled.
Note: Do not use the saw blade to cut galvanised ma-
terials or wood containing galvanised nails. Do not use
the saw blade to saw firewood!
The equipment is to be used only for its prescribed purpose.
Any other use is deemed to be a case of misuse. The user /
operator and not the manufacturer will be liable for any dam-
age or injuries of any kind caused as a result of this.
32 | GB
The equipment is to be operated only with suitable saw
blades. It is prohibited to use any type of cutting-off
wheel.
To use the equipment properly you must also observe
the safety information, the assembly instructions and
the operating instructions to be found in this manual.
All persons who use and service the equipment have to
be acquainted with this manual and must be informed
about the equipment's potential hazards. It is also im-
perative to observe the accident prevention regulations
in force in your area. The same applies for the general
rules of health and safety at work.
The manufacturer will not be liable for any changes
made to the equipment nor for any damage resulting
from such changes. Even when the equipment is used
as prescribed it is still impossible to eliminate certain
residual risk factors. The following hazards may arise
in connection with the machine's construction and de-
sign:
• Contact with the saw blade in the uncovered saw
zone.
• Reaching into the running saw blade (cut injuries).
• Kick-back of workpieces and parts of workpieces.
• Saw blade fracturing.
• Catapulting of faulty carbide tips from the saw blade.
• Damage to hearing if ear-muffs are not used as nec-
essary.
• Harmful emissions of wood dust when used in
closed rooms.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the equipment is used
in commercial, trade or industrial businesses or for
equivalent purposes.

5. Safety information

General power tool safety warnings
m WARNING! Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operat-
ed (cordless) power tool.
www.scheppach.com