Introduction; Device Description (Fig. 1−23) - Scheppach Mst254 Originalbetriebsanleitung
Kapp-, zug- und gehrungssäge
Vorschau anzeigen
Andere Handbücher für MST254:
- Original bedienungsanleitung (80 Seiten) ,
- Originalbetriebsanleitung (132 Seiten) ,
- Originalbetriebsanleitung (112 Seiten)
Verfügbare Sprachen
Verfügbare Sprachen
1.
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We wish you a pleasant and successful working expe-
rience with your new machine.
Note:
According to the applicable product liability law the man-
ufacturer of this device is not liable for damages which
arise on or in connection with this device in case of:
•
improper handling,
•
non-compliance with the instructions for use,
•
repairs by third party, non authorized skilled work-
ers,
•
installation and replacement of non-original spare
parts,
•
improper use,
• Failures of the electrical system due to failure to
observe the national electrical requirements and
regulations
Please consider:
Read the entire text of the operating instructions prior
to the assembly and operation of the device.
These operating instructions are intended to make it
easier for you to get familiar with your device and utilize
its intended possibilities of use.
The operating instructions contain important notes on
how to work safely, properly and economically with
your machine and how to avoid dangers, save repair
costs, reduce downtime, and increase the reliability
and working life of the machine.
In addition to the safety regulations contained herein,
you must in any case comply with the applicable regu-
lations of your country with respect to the operation of
the machine.
Put the operating instructions in a clear plastic folder
to protect them from dirt and humidity, and store them
near the machine. The instructions must be read and
carefully observed by each operator prior to starting
the work. Only persons who have been trained in the
use of the machine and have been informed on the
related dangers and risks are allowed to use the ma-
chine. The required minimum age must be met.
In addition to the safety notes contained in the present
operating instructions and the special regulations of
your country, the generally recognized technical rules
for the operation of wood working machines must be
observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (fig. 1−23)
1.
Handle
2.
ON/OFF switch
3.
Lock switch
4.
Machine head
5.
Moving saw blade guard
5a.
Locking screw
6.
Saw blade
7.
Clamping device
7a.
Star knob screw
8.
Workpiece support
9.
Set screw for workpiece support
10.
Table insert
11.
Locking handle
12.
Pointer
13.
Scale
14.
Rotary table
15.
Fixed saw table
16.
Stop rail
16a.
Movable stop rail
16b.
Set screw
17.
Sawdust bag
18.
Scale
19.
Pointer
20.
Set screw for drag guide
21.
Drag guide
22.
Set screw
23.
Locking bolt
24.
Screw for cutting depth limiting
24a.
Rear knurled nut
25.
Stop for cutting depth limiting
26.
Adjusting screw (90°)
26a.
Locknut
27.
Adjusting screw (45°)
27a.
Locknut
28.
Flange screw
29.
Outer flange
30.
Saw shaft lock
31.
Inner flange
32.
Laser
32a.
Cover
www.scheppach.com
GB | 31
Fehlerbehebung
