Table of contents
1
Introduction ........................................................
2
Proper use..........................................................
3
Product description (Fig. 1-7).............................
4
Scope of delivery (Fig. 1) ...................................
5
Unpacking ..........................................................
6
Technical data....................................................
7
Safety instructions..............................................
8
Operation ...........................................................
9
Cleaning and maintenance ................................
10 Storage and transport ........................................
11 Disposal and recycling .......................................
12 Exploded view .................................................... 106
Explanation of the symbols on the
product
Symbols are used in this manual to draw your attention to
potential hazards. The safety symbols and the accompa-
nying explanations must be fully understood. The warn-
ings themselves will not rectify a hazard and cannot re-
place proper accident prevention measures.
Before commissioning, read and observe
the operating manual and safety instruc-
tions!
Attention! Failure to observe the safety signs
and warning information affixed to the prod-
uct and failure to observe the safety and op-
erating manual can result in serious injury or
even death.
Wear safety goggles.
Wear hearing protection.
If dust builds up, wear respiratory protection!
Explanation of the signal words in
the operating manual
DANGER
Signal word to indicate an imminently haz-
ardous situation which, if not avoided, will re-
sult in death or serious injury.
WARNING
Signal word to indicate a potentially hazard-
ous situation which, if not avoided, could re-
sult in death or serious injury.
8 | GB
CAUTION
8
Signal word to indicate a potentially hazard-
8
ous situation which, if not avoided, could re-
sult in minor or moderate injury.
9
9
ATTENTION
9
Signal word to indicate a potentially hazard-
9
ous situation which, if not avoided, could re-
9
sult in product or property damage.
10
10
1
Introduction
11
Manufacturer:
11
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability for
damage to the product or caused by the product arising
from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised spe-
cialists
• Installing and replacing non-original spare parts
• Improper use
Note:
The operating manual is part of the product and contain
important information for safe, proper and economical op-
eration. Please also observe the applicable national regu-
lations. Read all operating and safety instructions careful-
ly before use and only use the product as described.
Keep the manual and pass it on when you give the prod-
uct to someone else.
2
Proper use
The magazine attachment is suitable for use in conjunc-
tion with a compatible drywall screwdriver. The magazine
attachment enables many drywall screws to be screwed
in succession with an adjustable screw-in depth. The
magazine attachment is designed for driving drywall
screws with a maximum length of 55 mm into suitable ma-
terials in drywall construction.
The product may only be used in the intended manner.
Any use beyond this is improper. The user, not the manu-
facturer, is responsible for damages or injuries of any type
resulting from this.
An element of the intended use is also the observance of
the safety instructions, as well as the assembly instruc-
tions and operating information in the operating manual.
Persons who operate and maintain the product must be
familiar with the manual and must be informed about po-
tential dangers.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the product.
The product may only be operated with original parts and
original accessories from the manufacturer.
www.scheppach.com