Ordering Replacement Parts - Scheppach P-Kv51 Original Bedienungsanleitung

11.3 Storage
m Important!
Pull out the mains plug and ventilate the equipment and all
connected pneumatic tools. Switch off the compressor and
make sure that it is secured in such a way that it cannot be
started up again by any unauthorized person.
m Important!
Store the compressor only in a dry location which is not ac-
cessible to unauthorized persons. Always store upright, nev-
er tilted!
11.3.1 Releasing excess pressure
Release the excess pressure by switching off the compressor and
using the compressed air which is still left in the pressure vessel,
e.g. with a compressed air tool running in idle mode or with a blow-
out pistol.
11.4 Transport (fig. 1)
The compressor can be transported by tilting to the wheels.

11.5 Ordering replacement parts

Please quote the following data when ordering replacement parts:
• Type of machine
• Article number of the machine
Service information
Please note that the following parts of this product are subject to
normal or natural wear and that the following parts are therefore
also required for use as consumables.
Wear parts*: clutch
* Not necessarily included in the scope of delivery!
44 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58