Scheppach P-KV51 Original Bedienungsanleitung Seite 34

Follow the maintenance instructions.
–
Check the connection cable of the electric tool regularly and
–
have it replaced by a recognised specialist when damaged.
Check extension cables regularly and replace them when
–
damaged.
Pull the plug out of the outlet
10
During non-use of the electric tool or prior to maintenance and
–
when replacing tools such as saw blades, bits, milling heads.
Avoid inadvertent starting
11
Make sure that the switch is switched off when plugging the
–
plug into an outlet.
Use extension cables for outdoors
12
Only use approved and appropriately identified extension ca-
–
bles for use outdoors.
Only use cable reels in the unrolled state.
–
Remain attentive
13
Pay attention to what you are doing. Remain sensible when
–
working. Do not use the electric tool when you are distracted.
Check the electric tool for potential damage
14
Protective devices and other parts must be carefully inspected
–
to ensure that they are fault-free and function as intended prior
to continued use of the electric tool.
Check whether the moving parts function faultlessly and do
–
not jam or whether parts are damaged. All parts must be cor-
rectly mounted and all conditions must be fulfilled to ensure
fault-free operation of the electric tool.
Damaged protective devices and parts must be properly re-
–
paired or replaced by a recognised workshop, insofar as noth-
ing different is specified in the operating manual.
Damaged switches must be replaced at a customer service
–
workshop.
Do not use any faulty or damaged connection cables.
–
Do not use any electric tool on which the switch cannot be
–
switched on and off.
34 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58