The printing of the type designation on the connection cable is
mandatory.
AC motor
The mains voltage must be 230 V~
•
Extension cables up to 25 m long must have a cross-section
•
of 1.5 mm
Connections and repairs of electrical equipment may only be car-
ried out by an electrician.
Please provide the following information in the event of any en-
quiries:
Type of current for the motor
•
Machine data - type plate
•
Machine data - type plate
•
11. Cleaning, maintenance, storage and transport
m Important!
Pull out the power plug before doing any cleaning and main-
tenance work on the equipment. Risk of injury from electric
shock!
m Important!
Wait until the equipment has cooled down completely! Risk
of burns!
m Important!
Always depressurize the equipment before carrying out any
cleaning and maintenance work! Risk of injury!
11.1 Cleaning
Keep the equipment free of dirt and dust as far as possible.
•
Wipe the equipment with a clean cloth or blow it down with
compressed air at low pressure.
42 | GB
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
.
²