Available & Visual Alarms - PowerWalker DC UVS Bedienungsanleitung

6. Available & Visual Alarms
Front-Panel Visual Indicator
Label
ON A/C Green LED lights
Testing Green LED
Battery flashes
ON Battery Yellow LED lights
Low Battery Yellow LED
flashes
Replace Red LED flashes
Battery
Fault Red LED lights
NOTE: Audible alarm will not sound when mute switch I in ON position.
Audible
Alarm
None The DC UPS is operating
on A/C
None The DC UPS is conducting
a self-test. This automatic
procedure is normal and will
occur when the unit is
switched
periodically thereafter. This
procedure
approximately 5 minutes.
Tone every The DC UPS is operating
5 seconds on battery power. The alarm
will stop when main power
is returned.
one every The
1 seconds running low. This alarm will
continue
performs a forced shutdown
when
depleted.
one every This alarm warns that the
2 seconds battery has reached the end
of its useful life. The user
must replace the battery as
soon as possible to ensure
proper operation of the DC
UPS.
Continuous A
tone Disconnect equipment from
the
checking equipment.
Description
on,
will
battery energy
until the
the battery
fault has occurred.
DC UPS prior
EN
and
last
is
unit
is
to
Page 11