Safety Instructions - Ferm FEAG-115/500D Gebrauchsanweisung

Störungen
Wenden Sie sich in Störungsfällen, z.B. durch Verschleiß
eines Teils, an Ihren örtlichen Ferm-Vertragshändler.
Am Ende dieser Betriebsanleitung finden Sie eine
Zeichnung der erhältlichen Ersatzteile.
UMWELT
Um Transportschäden zu verhinderen, wird die
Maschine in einer soliden Verpackung geliefert. Die
Verpackung besteht weitgehend aus verwertbarem
Material. Benutzen Sie also die Möglichkeit zum
Recyclen der Verpackung.
Bringen Sie bei Ersatz die alten Maschinen zu Ihren
örtlichen Ferm-Vertagshändler. Er wird sich um eine
umweltfreundliche Verarbeitung ïhrer alten Maschine
bemühen.
GARANTIE
Lesen Sie die Garantiebedingungen auf der separat
beigefügten Garantiekarte.
SPARE PARTS LIST FEAG-115/500D
FERM NR DESCRIPTION
406962 FLANGE SET
406963 GUARD
406964 AUXILIARY HANDLE
406965 SWITCH COMPLETE
406966 CARBON BRUSH (SET)
406967 FLANGE KEY
FERM NR UMSCHREIBUNG
406962 FLANSCHSATZ
406963 SCHUTZHAUBE
406964 ZUSATZHANDGRIFF
406965 SCHALTER (KOMPLETT)
406966 KOHLE BÜRSTEN (SATZ)
406967 FLANSCHSCHLÜSSEL
10
ı
CE ( D )
KONFORMITÄTSERKLÄRUNG
Wir erklären in alleiniger Verantwortung, daß
dieses Produkt mit den folgende Normen oder
normativen Dokumenten übereinstimmt:
EN50144-1, prEN50144-2-3,
EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3,
gemaß den Bestimmungen der Richtlinien:
98/37EEC
73/23EEC
89/336EEC
ab 01-01-2005
ZWOLLE NL
W. Kamphof
Quality department
REF. NR
1,3
4 TILL 6
20
32, 35, 41
39
49
REF. NR
1,3
4 BIS 6
20
32, 35, 41
39
49
ANGLE GRINDER 115 MM
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
TECHNICAL SPECIFICATIONS
Voltage
Frequency
Power input
No-load speed
Disc diameter
Spindle dimension
Weight
Lpa (sound pressure)
Lwa (acoustic power)
Vibration value
PRODUCT INFORMATION
Fig.A
1. On/off switch
2. Guard
3. Side handle
4. Grinding disc
5. Spindle lock
PACKAGE CONTENTS
The package contains:
1 Angle grinder
1 Side handle
1 Spanner
1 Disc
1 Set carbon brushes
1 Instruction manual
1 Guarantee card
Check the machine, loose parts and accessories for
transport damage.
Ferm Ferm

SAFETY INSTRUCTIONS

The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Risk of fire.
| 230 V
| 50 Hz
Carefully read this manual before using the machine.
| 500 W
Make sure that you know how the machine functions and
| 11000/min
how to operate it. Maintain the machine in accordance
| 115 mm
with the instructions to make sure it functions properly.
| M14
Keep this manual and the enclosed documentation with
| 2.1 kg
the machine.
| 87.4 dB(A)
| 100.4 dB(A)
When using electric machines always observe the safety
| < 2.5 m/s 2
regulations applicable in your country to reduce the risk
of fire, electric shock and personal injury. Read the
following safety instructions and also the enclosed safety
instructions.
Keep these instructions in a safe place!
1. Keep work area clear.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose power tools to rain. Do not use power
tools in damp or wet locations. Keep work area well lit.
Do not use power tools in presence of flammable liquids
or gases.
3. Guard against electric shock.
Prevent body contact with grounded surfaces (e.g. pipes,
radiators, refrigerators).
4. Keep visitors away.
Visitors should be kept away from the work area at all
times. Do not let visitors handle the Electric Rotary
Hammer Drill at any time.
5. Store unused tools.
When not is use keep tools out of reach of children. Store
in a dry and secure location.
6. Do not force tool.
Do not apply undue pressure as this may affect
performance and may cause damage to the machine.
Forcing the job also increases the potential for accidents.
7. Use right tool.
Do not force small tools or attachments to do the job of
heavy duty tool. Do not use a tool for purposes not
intended.
8. Dress properly.
Do not wear loose clothing or Jewellery. They can be
caught in moving parts. Rubber gloves and nonskid
footwear are recommended when working outdoors.
Wear protective hair covering to contain long hair.
9. Use safety glasses.
Also use face or dust mask when operation is dusty.
10. Connect dust extraction equipment
If devices are provided for the connection of dust
extraction and collection facilities ensure these are
connected and properly used.
3