Cleaning And Maintenance; Technical Specifications - Omnitronic cp-30p Bedienungsanleitung

7

CLEANING AND MAINTENANCE

Disconnect from mains before starting maintenance operation! We recommend a frequent cleaning of the
•
device. Please use a soft lint-free and moistened cloth. Never use alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations
•
are only to be carried out by authorized dealers.
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating. Before
•
replacing the fuse, unplug mains lead.
Should you need any spare parts, please use genuine parts. If the power supply cable of this device
•
becomes damaged, it has to be replaced by a special power supply cable available at your dealer.
Should you have further questions, please contact your dealer.
•
..............................................................................................................................................................................
8

TECHNICAL SPECIFICATIONS

Power supply:
Output power and power consumption:
CP-30P:
CP-60P:
CP-120P:
Outputs:
Speakers:
Line:
Inputs:
Mic 1:
Mic 2, 3 / Line 1, 2:
Line 3, 4:
Tel., MOH:
Frequency range:
S/N ratio:
THD:
Audio player:
Protective circuits:
Dimensions:
Weight:
CP-30P:
CP-60P:
CP-120P:
Specifications are subject to change without notice due to product improvements.
CP-30P / CP-60P / CP-120P
230 V AC, 50 Hz or 24 V DC emergency power battery
30 W , 60 W
RMS
60 W , 100 W
RMS
120 W , 200 W
RMS
70/100 V oder 4-16 Ω (screw connectors)
0.775 V (RCA)
5-8 mV/600 Ω (XLR)
5-8 mV/600 Ω (6.3 mm jack, unbal.)
150-470 mV, 10 kΩ (RCA)
screw connectors
60-15000 Hz
>85 dB (line), >75 dB (mic)
<0.5 %
USB, SD(HC), FM tuner, Bluetooth
Overload, short circuit, clip limiter, overheat
320 x 238 x 93 mm
2.6 kg
7 kg
8 kg
26