Starting Of A Programme - Respekta GSPS 60 A++ Bedienungsanleitung

Starting of a programme

1. Fill the lower rack first.
2. Pour the dishwasher detergent and the water softener (=dishwasher salt) in the
relevant containers.
3. During operation the appliance must be supplied with water ( full water
pressure).
4. Close the door properly while pressing gently. When the door closes properly
you will hear a light KLICK.
5. Press the PROGRAM button to select a programme.
6. Press the OFF button when the programme has ended. Open the door.
How to change a programme
You can only change a programme when it has run a short period of
time. Otherwise the detergent has dissolved and the dishwater has been
drained. In such a case you must refill the detergent container.
1. Open the door and press the current programme selection for at least 3
seconds.
2. Set the new programme.
3. Close the door.
47