Respekta GSPS 60 A++ Bedienungsanleitung Seite 36

Water inlet hose(for cold water)
Connect the inlet hose to a connector with a 3/4
inch thread firmly and securely. When the hoses are
new or were not used for an extended period of time,
let the water flow until the hose is clear of any
contamination. NOTICE! Otherwise the water inlet
may be blocked and the appliance will be damaged.
If the drainage hose is longer the 4 m. the dishes will not be cleaned properly .
Check that the connection does not leak. Fix the outlet hose with a hose-holder.
3 APPLINCE AND CONTROL PANEL
Wastewater hook-up. Fit
the drainage hose of your
appliance to the drainage
pipe without bending.
If the length of the hose is
not sufficient, apply to your
authorized service for an
extension made from the
same
original hose. Remember
that the length of the hose
(including
should not exceed 4 meters.
1. Fork shelf
2. Spray arm
3. Lower rack
4. Water softener
5. Detergent dispenser
6. Rinse aid dispenser
7. Cutlery basket
36
material as the
extension)
3