2. When you fill the container for the first time, pour approx. 500 ml water into
the container.
3. Put the equipped funnel in the opening and pour approx. 2 kg water softener
(=dishwasher salt) in the container.
4. Close the lid carefully.
5. The control light for the hardness of water usually goes off after 2-6 days.
6. You must refill the container when the water softener indicator has gone on. As
long as the water softener has not dissolved, the water softener indicator can
keep indicating even the container is filled. If you have spilled some water
softener when filling the container, you can set a special programme to wash
out the residuals.
C. Filling of the rinse aid container
• When the rinse aid indicator is not on, the colour of the display device "D"
indicates the needed quantity of rinse aid.
Dark spot = container filled to capacity.
The smaller the spot the emptier the container. The container should
be filled not less than 25%.
39