Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting; Application Examples - Bosch MUM52 Series Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für MUM52 Series:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
en
Troubleshooting 

Troubleshooting

W Risk of injury!
Before eliminating a fault, pull out the mains 
plug.
Important information for
MUM54../MUM55../MUM56../MUM58..
The Operating indicator flashes if the appli-
ance has been operated incorrectly or the 
electronic fuse has tripped or the appliance 
is defective.
The swivel arm must be engaged in
every operating position.
Initially try to eliminate the problem which 
has occurred with the help of the following 
information.
Fault
Appliance does not start.
Remedial action
  ■ Check the power supply.
  ■ Check the mains plug.
  ■ Check swivel arm. Correct position? 
Engaged?
  ■ Screw on blender or bowl as far as 
possible.
  ■ Attach the blender cover and screw on as 
far as possible.
  ■ Attach drive cover to unused drives.
  ■ The safety lock is active. Switch 
appliance to P and then back to the 
required setting.
Fault
Appliance switches off during use. The 
overload protection feature has been 
activated. Too much food was processed at 
one time.
Remedial action
  ■ Switch off the appliance.
  ■ Reduce processing quantity. 
  ■ Do not exceed permitted maximum quan-
tities (see "Application examples").
Fault
While the drive was running, the release 
button was inadvertently pressed. The 
swivel arm moves up. The drive switches 
off, but does not stop in the tool change 
position.
26 
Remedial action
  ■ Set the rotary switch to P.
  ■ Move swivel arm to position 1.
  ■ Switch on appliance (setting 1).
  ■ Switch off appliance again.
Tool stops in tool change position.
Fault
Blender does not start working or stops 
during use, the drive is "humming". Blade is 
blocked.
Remedial action
  ■ Switch off the appliance and pull out the 
mains plug.
  ■ Detach the blender and remove the 
obstruction.
  ■ Re-attach the blender.
  ■ Switch on the appliance.
Important information
If the fault cannot be eliminated, please 
contact customer service.

Application examples

Whipped cream
100 g-600 g
  ■ Whip cream with the whisk for 1½ 
to 4 minutes at setting 7 (4) depending on 
the quantity and properties of the cream.
Egg white
1 to 8 egg whites
  ■ Beat egg white with the whisk for 
4 to 6 minutes at setting 7 (4).
Sponge mixture
Basic recipe
2 eggs
2-3 tbs. hot water
100 g sugar
1 packet of vanilla sugar
70 g flour
70 g cornflour
Baking powder if required
  ■ Beat the ingredients (except flour and 
cornflour) with the whisk for approx. 
4-6 minutes at setting 7 (4) until frothy.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis