Electrical Installation; Mains Connection - Dometic RMF8500 Montageanleitung

Installation
Gas connection RMF 85x0 models
1
Gas connection
RMF 85x1, RMF 85x5 models
CAUTION!
20 Nm
10 Nm
max
max
1
(Ermeto-) Olive type fitting L8,
1
(EN ISO 8434)
SW 17
SW 14
Fig. 44
SW 17
SW 14
Fig. 45
22
4.8

Electrical installation

WARNING!
The electrical installation shall be carried
out by qualified personnel only.
* Specialised personnel are accredited experts who are
able, by virtue of their training and knowledge, to vouch
for the correct installation.
n
The electrical installation must be in
accordance with the national regulations
of the respective countries.
n
The connection cables must be routed in
a way to prevent contact with hot com-
ponents of the unit/burner or with sharp
edges.
n
Cable cross-sections must be large
enough to avoid performance degradati-
on of the refrigerator by high voltage
drop on the cable.
n
Changes to the internal electrical instal-
lation or the connection of other electri-
cal components (e.g. external fan) to the
internal wiring of the appliance will ren-
der the e1/ CE admittance as well as any
claims from warranty and product liabili-
ty void.

4.8.1 Mains connection

n
The power should be supplied by a pro-
perly grounded socket outlet or a groun-
ded non-detachable connection. Where
a socket outlet with mains supply is
used, the outlet must be freely accessi-
ble. We recommend leading the power
supply via a board-side fuse protection.
n
Should the connection cable be dama-
ged, have it replaced by Dometic
Customer Services or by qualified per-
sonnel to avoid hazards.