Herunterladen Inhalt Inhalt Diese Seite drucken

Installation Instructions; Installation; Side Installation With Ventilation Grilles - Dometic RMF8500 Montageanleitung

Absorber-kühlschrank rfm-series
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Installation

4.0 Installation instructions

4.1
Installation
WARNING!
The appliance may be installed by autho-
rised personnel only!
i
Deviations from these installation instruc-
tions without prior notification of Dometic
result in Dometic GmbH's warranty obliga-
tions becoming void!
The unit and the exhaust duct system must be
in principle installed so that it is accessible for
maintenance work, can be easily installed and
dismantled and removed from the vehicle wit-
hout great effort.
Installation and connection of the appliance
must comply with the latest technical regulati-
ons, as follows:
n
The electrical installation must comply
with national and local regulations.
n
The gas installation must comply with
national and local regulations.
n
European Standard EN 1949
n
European Standards EN 60335-1,
EN 60335-2-24, EN 1648-1 , EN 1648-2
n
The appliance must be installed in such
a way that it is shielded from excessive
heat radiation.
Excessive heat impairs performance and
raises the energy consumption of the refri-
gerator!
4.1.1 Side installation with ventilation
grilles
If possible, do not install the refrigerator on the
side of the entrance door. An awning or a
caravan annex tent is often installed on this
side. This complicates evacuation of combu-
stion gases and heat through the ventilation
grilles (loss in cooling performance)!
OK
If the refrigerator is installed on the same side
of the vehicle as the entrance door, it is desi-
rable that the door does not cover the refrige-
rator's vents. Otherwise ventilation could be
impaired which causes a loss in cooling per-
formance.
There must be a distance between the door
and the air vents of at least 25 mm! (Fig. 4).
OK
If the door/grille distance is between 25 mm
and 45 mm, we recommend installing a
Dometic ventilation kit ( item no. 241 2985 -
01 ) to achieve an optimal cooling performance
in high ambient temperatures.
10
min. 25 mm
Fig. 3
Fig. 2
Fig. 4

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Rmf8501Rmf8505

Inhaltsverzeichnis