Create Wind Clear Easy Bedienungsanleitung Seite 11

• Make sure the ceiling where you want to mount the fan is stable and able to safely support
the weight of the fan.
• Do not fix the mounting bracket directly to ceilings less than 10mm to avoid the risk of the
screw loosening and coming out.
• Mark the correct position of the holes and secure the mounting bracket using the screws
with metal anchors or screws and washers appropriate to the type of ceiling chosen.
• Once the mounting bracket is installed, verify proper installation before hanging the fan.
The mounting bracket must support the entire weight of the fan.
W IRING CON N ECT I ON
Before connecting the wiring, secure the fan to the mounting bracket using the carabiner
and steel cable, as shown below.
Drill the necessary holes and then secure the mounting bracket
with the wood screws and washers to the ceiling joints.
Drill holes with an 8mm drill bit, according to the length of the
expansion screws. Next, secure the mounting bracket to the
ceiling with the expansion screws.
Drill the necessary holes and then secure the mounting bracket
with the special spring-loaded fixing screws for use in false
ceilings.
Wooden roof
Concrete ceiling
False ceiling
E NGLI SH
11