Dreame R10s Lite Bedienungsanleitung Seite 5

Product Installment and Overview
Installment of Stick Vacuum
a) Connect the dust cup to the main body based on the position shown
in the diagram. The installation is complete when you hear a "click"
sound.
b) Connect one end of the foldable rod to the dust cup air inlet based
on the position shown in the diagram. The installation is complete
when you hear a "click" sound.
c) Connect the illumination multi surface brush to the other end of
the foldable rod based on the position shown in the diagram. The
installation is complete when you hear a "click" sound.