Dreame R10s Lite Bedienungsanleitung Seite 10

5. Assemble the pre-filter and the
cyclone assembly.
*It is recommended to clean the dust cup once every month.
Cleaning the Illumination Multi Surface Brush
1. As shown in the figure, push
the button to remove the roller
from the brush.
3. Once the brush roller is dry,
reinstall it as shown in the
figure.
6. Reinstall the dust cup into the
vacuum.
2. When the brush roller is dirty,
rinse it with clean water. Then
stand the brush roller upright for
at least 24 hours until it is fully
dry.