Connections - auna BC-10 Bedienungsanleutung

CONNECTIONS

Mic Connection
1. Mixed with playback from BT, USB PLAYER or AUX IN.
2. On the microphone, there is an ON/OFF switch. Ensure that you set the
switch to ON position during the usage.
3. The volume of microphone can be adjusted by the MIC VOLUME knob on
the rear side of the unit together with the speaker volume at the same
time. (There is no independent microphone volume control)
4. You can start to sing-along with the music playback..
Guitar connection
Plug the 6.3mm guitar plug (or other Hi-Z instrument) into the GUITAR IN
jack on the rear side of your unit. Their output is mixed with playback from
BT, USB PLAYER or AUX IN.
AUDIO OUTPUT Connection
Please follow the steps below to connect audio signal from the unit to your
home audio system.
1. Locate the RCA cables (not included).
2. Connect audio cable's white and red plugs to the white and red AUDIO
OUT jacks of the back panel of your unit.
3. Connect the other ends of the audio cable's white and red plugs to the
external unit's audio input white and red jacks..
ECHO control
Adjust the ECHO control to enhance the singers' voice for a concert hall
effect.
Party lighting
Press PARTY LIGHT ACTIVATE button to switch on the party light show.
Press again to turn off. If you are change the mode of light show, press the
PAIRING button.
EN
21