Power Connection - auna BC-10 Bedienungsanleutung

EN
20

POWER CONNECTION

Before using your BT wireless system, connect the power adaptor to AC
outlet.
1. Firmly and securely insert the DC plug of the adaptor to the DC IN jack
on the rear of the unit.
2. Plug the adaptor's AC plugs into an AC outlet.
3. Power on the unit by pressing the STANDBY button on the front of the
unit, the power indicator will light up.
When the unit is not operated by the AC power or unused for long periods
of time, please remove the power adaptor from the wall outlet and unplug
from the main unit.
RECHARGING THE INTERNAL BATTERY
After prolonged use, the internal battery will become weak and the
operation may become intermittent. When the internal battery charge is
low, the BATTERY INDICATOR will show low level alerting you to recharge
the internal battery as soon as possible.
Notes
• Charging time will vary if you are listening to music while charging the
internal battery . We recommend you switch off the unit power during
the charging process .
• To prolong the life of a rechargeable battery , it is recommended to
completely discharge it before fully charging it again.
• Rechargeable batteries need to be cycled for maximum performance
and longer battery life. If you don't use the player that often, be sure to
recharge the battery at least once a month in order to keep the internal
battery working properly.