Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
24
DC 5V only.
•
The USB "CHARGER" port of this unit is designed for smart phone
or portable device battery charging only and it cannot support data
transfer or connect to computer.
•
Do not connect the USB port of this unit to other external power
charger USB ports, it may damage both units and void the warranty.
•
Some smart phones and portable devices use proprietary USB
connections and circuitry, so they may not charge when plugged into
the USB port. Please refer to your device user manual before you
attempt to charge them.
•
It is normal for the unit to be warm while the USB port is in use and
charging your smart phone or portable device.
•
Do not charge your smart phone over 12 hours continuously.
ENERGY SAVING
The unit will automatically switch to Standby mode after 15 minutes
following situations described as below.
1.
In BT mode: if there is no connect or BT Device playback stops.
2.
In MIC 1, 2 input: if microphones are switch to OFF. 3. In AUX input:
external player playback stops.
3.
Press STANDBY button once again to turn on the unit.
APS function is for energy savingpurpose.
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
