Charging Your Portable Device - auna BC-10 Bedienungsanleutung

3. Start playing the device you plugged into AUX IN input. Their output is
mixed with playback from BT, USB PLAYER or MIC IN.
4. Slowly adjust both the volume controls of the unit and the external
device until you reach a comfortable listening level.
5. Press STANDBY button again to turn off the unit. Remember to shut
down the external player power.
Note
• If you are connected to the Line Out jack of your external device then
you only need to adjust the volume control on the unit. If you are
connected to the headphone jack of your external device, then you may
need to adjust both the volume control of your external device and the
BC10 to obtain the most desirable volume setting.
• If you use AUX IN function when playing BT audio, AUX IN audio will be
mixed when the audio cable is plugged in. Unplugging the audio cable
will resume BT audio. We suggest you to stop playback or disconnect
the BT device when playing music via Line In mode.

CHARGING YOUR PORTABLE DEVICE

This unit features a USB "CHARGER" port for charging your portable device
(iPod, iPhone, Android phone, etc.) when used with the USB charging cord
that came with your device
1. Connecting a power adaptor (see "Power connection") into the main
unit. USB "CHARGER" port can't control to off by STANDBY button of the
unit.
2. Plug one end of the USB cable (not included) into the USB "CHARGER"
Port located on the back of the unit. Plug the other end of the cord into
the device you wish to charge.
3. Observe the battery charge indicator on your device and the charging
will start immediately.
4. Unplug the cable when your device is charged.
Notes
• Before charging, please refer to the user manual of the device you wish
to charge to make sure the charging current requested does not exceed
1A (1000mA) of charging current. Overloading the charge
• The USB "CHARGER" port of this unit supplies a DC 5V output at
1000mA maximum current to charge your portable device battery and it
cannot support any other voltage range.
• Make sure the device you want to charge has a battery charge rating of
EN
23