Technics SL-1200G Bedienungsanleitung Seite 21

3
Press [RESET] to light the pitch
control blue LED lamp.
The unit plays at a preset pitch (33-1/3, 45
or 78 rpm) regardless of the [PITCH ADJ]
position.
Blue LED
indicator
RESET
button
4
Lift the cue lever and move the
tone arm over the record.
Cue lever
5
Lower the cue lever.
The tone arm moves down slowly.


To temporarily stop play
Lift the cue lever.
 The stylus lifts off the record.
 To start play again, lower the cue lever.
 Fine adjustment to
pitch (  22)
Play starts.
 
When play finishes

Lift the cue lever, return the tone arm to the
arm rest and lower the cue lever.

Press [START-STOP].
The electronic brake gently stops the
turntable.

Turn [ON/OFF] to turn the unit off.

Clamp the tone arm with the arm clamp.

Put the stylus cover back on (to protect the
stylus tip).
 
To light up the stylus
The stylus tip is illuminated during play.
Press the stylus light switch.
 The stylus light (white LED) rises up and
illuminates the stylus.
 Press down the stylus light to turn off the
light.
Attention
Press the stylus light switch firmly. If the switch
is lightly pressed, the light may come on but not
rise up.


When playing EP records
 Press the speed select button [45] ([45]
lights).
 Fit the EP record adaptor over the centre
spindle.


When playing SP records
 Press the speed select buttons [33] and [45]
at the same time (78 rpm: [33] and [45]
light).
 
When using a record stabilizer (not
included)
 See the instruction manual of the record
stabilizer.
 Maximum weight: 1 k g
Stylus light
Stylus light switch
21
(21)
English