Specifications - Technics SL-1200G Bedienungsanleitung

Specifications

General
Power supply AC 110 - 240 V, 50/60 Hz
Power 14 W (Power ON)
consumption 0.2 W (Power OFF)
Dimensions 453 x 173 x 372 mm
(W×H×D)
Approx. 18.0 k g
Mass
Turntable section
Type Direct drive manual
turntable
Drive method Direct drive
Motor Brushless DC motor
Turntable Brass and aluminum diecast
combined
Diameter: 332 mm
Mass: Approx. 3.6 k g
(including a rubber sheet)
Turntable speeds 33-1/3, 45 and 78 rpm
Variable range ±8 % and ±16 %
pitch
3.3 k g -cm
Starting torque
Build-up 0.7 s. from standstill to
characteristics 33-1/3 rpm
Braking system Electronic brake
Wow and flutter 0.025 % W.R.M.S.
(JIS C5521)
Rumble 78 dB (IEC 98A weighted)
Tone arm section
Type Static Balance
Effective length 230 mm
Overhang 15 mm
Tracking error Within 2° 32' (at the outer
angle groove of 30 cm (12")
record)
Within 0° 32' (at the inner
groove of 30 cm (12")
record)
Offset angle 22°
Arm-height 0 – 6 mm
adjustment range
0 – 4 g (direct reading)
Stylus pressure
adjustment range
Head shell weight Approx. 7.6 g
Applicable (Without the auxiliary weight)
5.6 to 12.0 g
cartridge weight
14.3 to 20.7 g (including the
range
head shell)
(With the small auxiliary weight)
10.0 to 16.4 g
18.7 to 25.1 g (including the
head shell)
(With the big auxiliary weight)
14.3 to 19.8 g
23.0 to 28.5 g (including the
head shell)
1.2 mm φ 4-pin terminal lug
Head shell
terminal lug
Specifications are subject to change without
notice.
25
(25)
English