Cleaning And Care; Maintenance; Repair; Storage - Parkside Pat 20-Li A1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

WARNING!
m
Remove the battery pack
the product before clearing the
jammed staples or nails.
1. Open the magazine
push rod from the product.
[ 8 ]
2. Remove the jammed staples/nails from
the magazine.
˜ Cleaning and care
WARNING!
m
Remove the battery pack
and let the product cool down
before performing inspection,
maintenance and cleaning work!
NOTES
Do not use chemical, alkaline,
u
abrasive or other aggressive
detergents or disinfectants to
clean this product as they might be
harmful to its surfaces.
Never allo uids to get into the
u
product.
The product must always be kept
u
clean, dry and free from oil or
grease. Remove debris from the
product after each use and before

storage.

Regular and proper cleaning will help
ensure safe use and prolong the life of
the product.
Clean the product with a dry cloth. Use
o
a soft brush for areas that are hard to
reach.
20 GB/IE/NI/MT
from
[ ]
by pulling the
7 ] [
[ ]
˜ Maintenance
WARNING!
m
Remove the battery pack
and let the product cool down
before performing inspection,
maintenance and cleaning work!
The product is maintenance-free.
Before and after each use, check the
o
product for wear and damage.
˜ Repair
This product does not contain any
o
parts that can be repaired by the user.
Contact an authorised service centre
or a similarly ualified person to have it
checked and repaired.
˜ Storage
WARNING!
m
Remove the battery pack
let the product cool down.
The ideal storage temperature is
between +10 °C and +30 °C and
relative air humidity not above 0
Store the battery pack separately.
o
Remove staples or nails from the
o
magazine .
[ 7 ]
Clean the product (see "Cleaning and
o
care").
Store the product in a dark, dry, frost-
o
free, well-ventilated place.
Always store the product in a place
o
that is inaccessible to children.
Battery pack advice
When storing the battery pack for
o
1 month or more: Only store the
battery pack partially charged. The
battery pack should be charged
to 0 to 0
charging level LEDs
storage.
[ ]
and
[ ]
.
(red and orange
) before
[ ]