pyrexx PX-1 Betriebsanleitung Seite 39

Splint pin (activation backup)
The splint pin (activation backup) is used
during the transport of the device to pro-
tect against accidental activation.
Activation button
The activation button is used to turn the
device on and off.
Magnet carrier
The magnet carrier is used for fastening
the device.
Smoke intake lamellas
Smoke from the fire reaches the inside
of the device through the smoke intake
lamellas and can then be detected by
sensors.
EN
EN
Operating Manual: PX-1 - Smoke Alarm Device
Testing/stop button
(smoke alarm device cover)
The testing/stop button (smoke alarm
device cover) is used for a self-test.
The testing/stop button (smoke alarm de-
vice cover) can be actuated to interrupt
or stop alarm and alert tones.
39