Setting The Desired Remote Control Channel; Connecting To A Light And Controlling It Using The Dmx Control Panel/Remote Control - Walimex Pro Soft LED 800 Bi Color Flat Gebrauchsanleitung

10.5 Setting the desired remote control channel

The lights of the walimex pro Soft LED series can be controlled by a DMX 512 remote
controll unit. You will need a DMX control unit device to do this. This is not included and
must be purchased separately.
• The chosen DMX channel will be shown on the display (6) in the <DMX> field.
• P ress the touch-sensitive operating fields indicated with the arrow on the touch
display to set the desired channel.
• You can attribute numbers 1 to 512 to the channels.
10.6 Connecting to a light and controlling it using the DMX control panel/
remote control
• Connect the DMX control cable supplied (or a compatible DMX cable) with the
output connector of a suitable DMX remote control (not included).
• Connect the other end of the cable with the DMX input socket (9) marked <DMX
IN> or <DMX 1>.
• Make sure you choose the right socket/plug.
• The chosen DMX channel of the light will be shown on the display (6) in the <DMX>
field.
• Use the arrow buttons on the light as per the instructions provided with the DMX
control unit (see manufacturer instructions) to set the same channel/address on
both devices.
• The desired channel is automatically adopted once the channel has been selected.
• The LED light is now controlled via the DMX signal of the remote control unit.
58
For more details on DMX address setting, please refer to the table below and the
instructions for controlling a DMX.
Note
The devices of the walimex pro Soft LED series are equipped with 3-pin XLR
DMX connections. If your DMX control unit has a 5-pin DMX connection system,
the use of suitable 5-pin on 3-pin adapters is necessary. These adapters can be
purchased separately.
59