Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9.
Power supply
9.1 Connecting the power adapter with the light (not for model 2400)
Except for model 2400 (internal power adapter built-in), all models of the walimex
pro Soft LED series have an external power adapter unit. On models 800 and 1200,
the external power adapter is fixed in a holding frame on the light housing. For
models 1400 and 1500 note mandatory the installation instructions of the power
adapter (see point 8).
• Switch the device off with the ON/OFF switch (5) on the device.
• Connect the connection plug (4-pin XLR) of the ac power adapter to the connector
on the light. Ensure that the pins are inserted correctly as indicated by the groove.
• The click of the locking lever indicates that the cable has been secured in place.
• Connect the 3-pin power supply cable to the power supply unit.
• Plug the power cable into the socket of the local electric power supply
(AC 220-240V/50 Hz).
• The LED light is now ready for use.
• Do the same in reverse to remove the power supply.
• T o remove the 4-pin XLR plug (4), the incorporated security lever must first be
unlocked.
Safety lever 4-pin XLR plug
52
9.2 Connecting the power cable to the light (only for model 2400)
On walimex pro Soft LED 2400 light, there is an internal power adapter built-in. So
this light panel will directly be connected with the local electric power supply
• Switch the device off with the ON/OFF switch (5) on the device.
• Connect the 3-pin power connection cable to the connector (AC INPUT) on the
side of the light.
• Plug the power cable into socket of the local power supply (AC 220-240V/50 Hz).
• The LED light is now ready for use.
ATTENTION
On the backside of the LED light, near the <AC INPUT> connector, 2 additional
power sockets are placed (18). These are marked with <AC OUTPUT>. With the
help of appropriate 3-pin power supply cables (plug socket) other devices can be
directly connected to AC 220-240V / 50 Hz power. The maximum power of these
two connections is 1500 watts cumulated. Exceeding this power output can cause
malfunction or damage of the unit.
53
Werbung
Inhaltsverzeichnis
