Unpacking And Checking The Device - Walimex Pro Soft LED 800 Bi Color Flat Gebrauchsanleitung

Vorschau ausblenden

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

WARNING

Danger of burning on hot parts

■ The illuminant may reach temperatures of up to 40 °C.

■ Don´t touch the parts during operation and cooling down.

■ Please cool down your device before starting any mounting or maintenance

arrangements.

WARNING

Danger of cutting and splintering caused by bursting illuminant

Illuminants can break or splinter when banging against the floodlight. Splinters can

cause eye and skin injuries.

■ Handle illuminants with care, to avoid breakage.

■ Make sure you do not touch the illuminant by accident when mounting or repla-

cing accessories.

WARNING

Danger of suffocation caused by small parts

Keep the device out of the reach of children and pets.

WARNING

Precautions when using with rechargeable battery

These can run out or explode, if inappropriately handled. Please observe the follo-

wing safety notes when handling the rechargeable battery for use with this unit:

■ Use only rechargeable batteries mentioned in these operating instructions.

■ Do not lay the rechargeable battery into fire or expose these to direct heat.

■ To prevent the product from being damaged make sure you have removed the

rechargeable battery if you will not use the product over a longer period of time

or if the rechargeable battery has been discharged.

■ If battery fluid has come into contact with skin or clothes, flush it off immediately

with fresh water.

■ Do not recharge the rechargeable battery unattended.

■ Once the reacharging process is finished, disconnect the charger from the

power supply.