Carl Valentin Vita II Serie Kurzanleitung Seite 95

Key:
Customized entry
Key:
Hotstart
Key:
Autoload
Key:
Manual reprint
Key:
Backfeed/Delay
Key:
Password
Key:
Label confirmation
Key:
Standard label
Key:
Synchronisation at
switching on
On: The question referring the customized variable appears once before the print start at the
display.
Auto: The question referring the customized variable appears again after print end.
Additionally a query appears demanding the number of copies that should be print.
Auto no quant: The question referring the customized variable appears again after print end.
However, the same number of copies is printed. This number was defined once at the start of
the print order.
Off: No question appears at the display. In this case the stored default value is printed.
On: Continue an interrupted print order after switching on the printer anew.
Off: After switching off the printer the complete data is lost.
On: A label which was loaded once from Compact Flash card can be loaded again
automatically after a restart of printer.
The last loaded label from CF card is always again loaded after a restart of printer.
Off: After a restart of printer the last used label must be again loaded manually from the
memory card.
A common use of the functions Autoload and Hotstart is not possible.
Yes: I In case an error occurred and printer is in stopped mode then you can reprint the last
printed labels by means of keys
No: Only blank labels were advanced.
Backfeed: The backfeed was optimised in the operating modes dispenser (optional), cutter
(optional) and tear off. Now, when driving into the offset, the following label is 'pre-printed' if
possible and therefore the backfeed of label is no necessary and time can be saved.
Delay: The adjustable deceleration time is only for mode Backfeed automatic of importance.
By a password several functions can be blocked, so the user cannot work with them.
On: A new print order is only printed after confirmation at the device.
An already active continuing print order is printed as long as the confirmation is effected at the
device.
Off: No query appears at the display of control unit.
On: If a print order is started without previous definition of label, the standard label is printed.
Off: If a print order is started without previous definition of label, an error message appears in
the display.
Off: In order to start the measurement procedure you have to change to the corresponding
menu.
Measure: After switching on the printer, the loaded label is automatically measured.
Label feed: After switching on the printer the label is synchronised to the beginning of label.
For this one or multiple labels are advanced.
English
and .
Vita II
95