Maintenance And Storage - Ruris Rxi3744E Handbuch

EN

6. MAINTENANCE AND STORAGE

Blade maintenance
Periodically clean the blade of grass and dirt. Clean the blade using a soft brush, do not use a water jet
At the beginning of the gardening season, carefully examine the blade. If it is very dull, sharpen it or replace
it.
If the blade is damaged or worn, replace it with a new one.
Warning! Observe the following safety precautions:
Stop the machine, disconnect the battery and wait for the blade to come to a complete stop before performing
any operation.
Careful! Use heavy-duty protective gloves when servicing or replacing the
blade.
Use only a designated replacement blade.
Do not remove the blade without a good reason.
Replacing the blade
Turn the car on its side. Hold the blade (C) with one hand.
Use a wrench (A) to loosen and remove the blade screw (B). Replace the
blade.
Tighten the nut securely.
Checks and safety measures:
a) Keep all nuts and bolts tight to ensure the machine is in good working
order.
b) Check the grass collector frequently for signs of wear or damage.
c) In the case of multi-blade machines, be aware that a rotating blade may
cause another blade to rotate.
d) While making adjustments to the machine, we recommend that you take great care to prevent fingers
from getting caught between the rotating blades and the fixed components of the machine.
e) Always allow the machine to cool before storing.
f) When performing blade maintenance, remember that even though the power source is turned off, the
blades may continue to move.
g) For safety reasons, replace worn or defective parts; Use only original spare parts and accessories.
h) Use only the replacement blade, blade pin and rotor designated for this product.
i) Grease the wheel connectors.
8