Storage - Ruris Rx300S Bedienungsanleitung

vibration machine
○ Engine speed too low
The machine
does not cut
○ Wet lawn
the lawn
○ Grass too tall
○ Knife damaged (not sharp)
○ Wheels not properly positioned
Uneven cut
○ Used knife
NOTE: For repairs other than the above adjustments, contact the nearest authorized RURIS
service.
The following steps must be followed to prepare the lawnmower for storage.
●
Clean and lubricate the machine carefully as described in the instruction manual.
● Coat the machine knife with petroleum jelly to prevent rusting.
●
Store the machine in a dry and clean area. Do not store it near corrosive material
or heating sources (central, stoves).
●
Empty the fuel from the tank.
● Start the machine and let it run until the fuel in the carburetor is used up and it stops.
26

11. STORAGE

○ Check the blade balance
○ Change the blade.
○ Adjust carburetor or governor levers
(service).
○ Do not mow the lawn when it is wet,
wait until it dries.
○ Cut once to high height then cut
again to desired height
○ Sharpen or replace the knife
○ Place all wheels in the same position
○ Sharpen or replace the knife
EN