Troubleshooting - Ruris Rxi3744E Handbuch

EN
j) Store the machine in a dry and clean area. Do not store it near corrosive material or heating
sources (central, stoves).
Do not dispose of electrical equipment, industrial electronics and components in
household waste! Information on WEEE. Considering the provisions of OUG 195/2005 -
regarding environmental protection and O.U.G. 5/2015. Consumers will consider the
following indications for the delivery of electrical waste specified below:
Consumers are required not to dispose of waste electrical and electronic equipment (WEEE) as unsorted
municipal waste and to collect this WEEE separately.
- The collection of these named wastes (WEEE) will be carried out through the Public Collection Service
within each county and through collection centers organized by economic operators authorized for the
collection of WEEE. Information provided by the Environmental Fund Administration www.afm.ro or the
journal of the European Union.
- Consumers can hand in WEEE free of charge at the previously specified collection points.
Problem
The engine does not work
Engine power decreases
Reduced performance.
Strong vibrations.
Inadequate grass grip.
The lawn is mowed
unevenly.
9

7. TROUBLESHOOTING

Possible cause
Batteries are discharged.
The safety button is defective.
Faulty engine.
The security key is not inserted.
Batteries are discharged.
The battery is not inserted correctly.
The battery is defective.
Batteries are discharged
The grass is too tall.
The blade is not mounted correctly.
The blade is blocked by a
foreign object.
The blade is damaged.
The collection bag is full.
The outlet is blocked.
The cutting height is not set correctly.
The blade is blunt.
The grass is too tall.
FIX
Charge the batteries.
Take the car to a
authorized RURIS service
center
Take the car to a
authorized RURIS service
center.
Enter the security key.
Charge the batteries.
Insert the battery correctly.
Replace with a new battery of
the same type.
Charge the batteries.
Adjust the cutting height
Check the blade.
Unlock the blade.
Replace the blade.
Empty the bag.
Clean the hole.
Adjust the cutting height.
Sharpen or replace the blade.
Adjust the cutting height.