Notice; Glossary; Pre-Flight Checklist - DJI Spark Sicherheitsvorschriften

NOTICE

All instructions and other collateral documents are subject to change at the sole
discretion of SZ DJI TECHNOLOGY CO., LTD ("DJI"). For up-to-date product
information, visit http://www.dji.com and check on the product page.

Glossary

The following terms are used throughout this document to indicate various levels of
potential harm when operating this product:
NOTICE: Procedures, which if not properly followed, create a possibility of
physical property damage AND a little or no possibility of injury.
CAUTION: Procedures, which if not properly followed, create the probability
of physical property damage AND a possibility of serious injury.
WARNING: Procedures, which if not properly followed, create the probability
of property damage, collateral damage, and serious injury OR create a high
probability of serious injury.
product or personal property and cause serious injury.
This is a sophisticated product. It must be operated with caution and common sense
and requires some basic mechanical ability. Failure to operate this product in a safe
and responsible manner could result in injury or damage to the product or other
property. This product is not intended for use by children. DO NOT use incompatible
components or alter this product in any way unless otherwise allowed by relevant
documents provided by SZ DJI TECHNOLOGY CO., LTD. These Safety Guidelines
contain instructions for safety, operation and maintenance. It is essential to read and
follow all of the instructions and warnings in the user manual, prior to assembly, setup
or use, in order to operate the product correctly and avoid damage or serious injury.
AGE RECOMMENDATION: NOT FOR CHILDREN UNDER THE AGE OF 15. THIS IS NOT A TOY.
Pre-flight Checklist
1. Ensure that you are using only genuine parts and that all parts are in mint
condition.
2. Ensure the remote control device and Intelligent Flight Battery are fully charged.
3. Ensure that there is no foreign object stuck to the camera lens, the Micro SD
card has been inserted into the aircraft, and the gimbal can rotate freely before
powering it on.
4. Keep the sensors of the Vision System and 3D Sensing System clean at all
times.
5. Ensure the propellers are securely mounted and tightened onto the motors, and
the motors can start and function normally.
6. Follow the on-screen instructions to calibrate the compass.
7. Ensure the DJI GO 4 App and aircraft's firmware have been upgraded to the
latest version.
8. Ensure that your flight area is outside the No Fly Zones and flight conditions are
suitable for flying the aircraft.
9. Be sure that you are NOT flying under the influence of alcohol, drugs or any
substance that may impair your cognitive abilities.
©
6 2017 DJI All Rights Reserved.
Read the ENTIRE user manual to become familiar with
the features of this product before operation. Failure to
operate the product correctly can result in damage to the