DJI Spark Sicherheitsvorschriften Seite 13

a. Read and understand the warning messages before using the Auto-take off
and Auto-landing features.
b. Read and understand the warning messages and disclaimer before setting
the altitude beyond the default limit.
c. Read and understand the warning messages and disclaimer before
switching between flight modes.
d. Read and understand the warning messages and disclaimer prompts near
or inside the no fly zone.
5. Land your aircraft immediately at a safe location if there is an alert shown on the
app.
6. Examine and check all warning messages on the checklist displayed in the app
prior to each flight.
7. Use the in-app simulator to practice your flight skills if you have never operated
the aircraft or if you do not have sufficient experience to be comfortable
operating the aircraft.
8. Beginner Mode is enabled by default when you launch the app for the first time. The
aircraft's altitude and flight distance is restricted when flying in Beginner Mode. We
recommend you fly in Beginner Mode to perfect your flight skills. Operate the actual
aircraft only after you are confident that you have mastered adequate flight skills.
9. Cache the map data of the area where you intend to fly the aircraft by
connecting to the Internet before each flight.
10. The app is designed to assist your operation. Please use your sound discretion
and DO NOT rely on the app to control your aircraft.
11. Your use of the app is subject to the DJI GO 4 app Terms of Use and DJI
Privacy Policy. Please read them carefully in the app.
Firmware
To avoid serious injury to children and animals, observe the following rule:
1. Keep children and animals at a safe distance during any firmware upgrade,
system calibration, and parameter setting procedures.
1. For safety, always update the firmware to the latest version when an upgrade
notification is shown in the DJI GO 4 app.
2. Firmware upgrade notifications will prompt you to proceed with an update
immediately or to update the firmware within three days. If you choose to ignore
the current firmware update, you are required to accept the prompted disclaimer.
You further understand and agree that the data including but not limited to user
selection records may be uploaded to and maintained on a DJI-designated server.
3. Be sure to download the firmware package file from the DJI ASSISTANT
Verify the firmware package file's integrity before upgrading.
4. The remote control device may become unlinked from the aircraft after
updating. Re-link the remote control device and aircraft.
5. Be sure to check all connections and remove the propellers from the motors
before performing the firmware update.
©
12 2017 DJI All Rights Reserved.
TM 2.