DJI Spark Sicherheitsvorschriften Seite 21

No Fly Zones
You shall be solely responsible for all your behaviors when flying with DJI
aircraft. DJI takes flight safety seriously, and has therefore developed various aids
to help users comply with local rules and regulations while flying. However, the
aids are not able to help you avoid penalty or punishment if you violate local
laws or regulations. We strongly recommend that you update the firmware to the
latest version to ensure the following features are fully updated:
No Fly Zones
1. No Fly Zones include but are not limited to major airports around world, borders
between two sovereign countries or regions, major cities/regions, etc.
2. The relevant information of No Fly Zones is listed on the official DJI website at
http://www.dji.com/flysafe/no-fly and is subject to periodic updates in line with
the latest regulatory requirements without prior notice.
3. Some No Fly Zones are comprised of several zones. Each zone features
circles of various sizes. The aircraft will NOT be able to take off in the inner
most zone of the No Fly Zone, and will descend to the specified altitude when
it approaches the edge of the inner most zone. Ground station functionality is
disabled when the aircraft is within a No Fly Zone.
4. Users are NOT able to set up waypoints within No Fly Zones.
Altitude Limit
1. Fly NO higher than 120 meters (400 feet) above ground level and stay away
from any surrounding obstacles.
2. If you intend to fly above the default altitude limit, you are required to accept
the prompted disclaimer to enable the new altitude limit. If a new altitude limit is
set, you further understand and agree that data including but not limited to flight
telemetry data and altitude limit changes could be uploaded to and maintained
on a DJI-designated server.
This content is subject to change.
Download the latest version from
http://www.dji.com/spark
SPARK is a trademark of DJI.
Copyright © 2017 DJI All Rights Reserved.