Manufacturer And Appliance Nameplates; Service Request Procedure - Angelo Po 08Wfa2Pg Benutzerhandbuch

GENERAL INFORMATION

MANUFACTURER AND APPLIANCE NAMEPLATES

The nameplate shown here is fi tted directly to
the appliance. It contains references and all es-
sential information for safe operation.
One (fi g.1) contains references and all essential
information for operating safety, and the other
(fi g.2) provides gas information for each coun-
try of use.
Appliance model
A)
Type of customisation
B)
Manufacturer's nameplate
C)
Type of fume exhaust vent
D)
Serial number
E)
Protection rating
F)
CE marking of conformity
G)
For any need, please contact Angelo Po's
agents or headquarters, which can be found
in the contacts section of the website http://
www.angelopo.com.
3329590_ut_GB_rev.2

SERVICE REQUEST PROCEDURE

Reference standard
H)
CE marking
L)
Product family type
M)
Gas pressure
N)
Appliance category
P)
Gas consumption
Q)
Rated power (kW)
R)
Gas type
S)
Code of country of destination
U)
Date of construction
V)
Voltage (V)
W)
Frequency (Hz)
X)
Rated power (kW)
Y)
When requesting service, state the data indi-
cated on the nameplate and provide a descrip-
tion of the fault.
ENGLISH
15