VEVOR 3018-PRO MAX Bedienungsanleitung Seite 32

How to Unlock Limit Switch
1. When the machine triggers limit switches, it will turn to "Alarm".
Console window will show the following error message: An
unexpectecd error was detected: (ALARM:1) Hard limit has been
triggered. Machine position is likely lost due to sudden halt.
Re-homing is highly recommended.[MSG:Reset to continue]
1
2.Click Soft Reset >Unlock, then jog the axis to the opposite
direction from the limit switches.
1
2
3. lf it turns to "ALARM" and shows error message again, repeat this
step. Click Soft Reset -> Unlock; then limit switch will be unlocked
completely.
1
2
4. Jog the axis to the opposite direction. The machine can run normally.
30
2