VEVOR 3018-PRO MAX Bedienungsanleitung Seite 28

Make your rst cut
1. Connect the USB cable and power on.
2. Copy the UGS installer from the USB disk or download UGS from here:
https://winder.github.io/ugs_website/download/
3. Unzip the le, nd "bin>ugsplaform64.exe", double click to open the
software.
4. Connect the machine and computer via USB cable, select
"Firmware-GRBL, COM port, and Baud-115200"; and then
click "Connect" button.
2
26
1