Onkyo R-100 Bedienungsanleitung Seite 12

How to Set the Timer Reservation
The timer reservation function makes it possible to turn the unit
on or off automatically at the desired time.
• The built-in timer starts and stops at the sametime everyday
until the timer reservation is cancelled.
• This function can be used when recording an FM or AM
broadcast during your absence,or to play a CD, TAPE, FM or
AM broadcast as an alarm clock. Pleasereferto the Instruction
Manual of the components
Example:
Settingthe timer reservationso that an FM broadcast ( 98.1 MHz)
starts at 20:00 and stops at 20:30.
Turn on the Power button.
@ FM98.1 MHz(station 3)isbeing received.
Artistry Sound
FM
@ Press t heprogram button.
"PGM" will come on and then "ON" will flash on the display.
Artistry in Sound
AUTO
O Setthetimeto 20:00, a twhichtimetheunitisturned on,by
DOWN
using the UP or
Artistry Sound
Avro
Press the MEMORY button.
• The "ON" time is set and the "OFF" flashes.
• The time displayed increasesautomatically by I hour.
@ Setthetimeto 20:30,at whichtimethe unitisto beturned off,
by using the UP or
Artistry in Sound
4
Auto
for details.
3
Z.
13B. /
4.
n.nn
I—leu
button.
ZI I¯l.nn
DOWN button.
bih¯- F4
c I-M.3u
NOTES:
The timer reservation
has been set. (Refer to "How to set the Current Time" on
page 10.)
Set the Volume Control knob to the minimum
recording during your absence.
If using this unit as an alarmclock, set the Volume Control
knob to the level you want when the unit is turned on.
8
Press the MEMORY
TIMER STAND-BY
returns to its previous state.
Select the desired source. In this example, select an FM broadcast
by pressing the SOURCE and call station 3 (98.1 MHz) by using
the UP or < DOWN
Artistry in Sound
TIMER STAro•gr STEREO
When selecting TAPE as a source, make sure that the timer
switches of the tape deck are set to a position other than the
"OFF" position. Also make sure that a tape is inserted in the
component. Load a disc only when using the timer to play a
CD. Do not load a disc when using the timer to play or record
from a source other than the CD. The CD function
lected if a disc has been loaded.
Manuals for details.
@ TurnoffthePower s witch.
NOTES:
When using the timer to play or record from a source other
than the CD, either turn OFF (
CD player or removethe disc from the C-100.
When a CD has been loaded but recording is being done from
a different source, do not turn the power to the C- 100 from
) to the ON (
the OFF ( A
How to Cancel the Timer
Press the STAND- BY button.
• The TIMER STAND-BY indicator goes out and the timer reser-
vation is cancelled. When setting the timer reservation again,
pressthe STAND-BY button so that the TIMER STAND-BY
indicator lights up.
NOTE:
If the "TIMER STAND-BY"
will not function, even though
— 11 —
cannot be set unless the current time
level when
button.
comes on. After I second, the display
button.
1-3 R
AUTO
will be se-
Please see their Instruction
) the power to the C-100
) position.
Reservation
indicator is not lighted, the timer
it may be set.
3.