Onkyo R-100 Bedienungsanleitung Seite 8

Control positions and functions
(See page 2)
Power Button (POWER)
Press once to turn power on and once again to turn power
off. The MULTI FUNCTION DISPLAY is illuminated when
poweris on. and thetimeisdisplayed whenpowerisoff. The
button is also enabled by button on the remote control trans-
mitter.
Remote Control Sensor
This sensor receives the remote control signals.
Mufti-function Display (MULTI FUNCTION DISPLAY)
Refer to page 8.
Input Selector Button (SOURCE)
The display changes from PHONO,FM,AM, CD,TAPE,VDP,
VCR, then to PHONO each time the button is pressed.
PHONO: Select to listen to the turntable.
Select to listen to a FM broadcast.
Select to listen to an AM broadcast.
AM:
Select to listen to the compact
CD:
Select to listen to the tape deck.
TAPE:
When recording on tape deck, the just-recorded
signal can not be monitored even if the tape deck
is a 3-head model.
Select to obtain the video and audio signals from the
Video Cassette Player or Video Disc Player connected
to the V DP jacks (for playback only).
Select to obtain the video and audio signals from the
VCR:
Video Cassette Recorder connected to the VCR jacks.
The button is also enabled by the button on the remote control
transmitter.
13) Volume Control Knob (VOLUME)
Turn clockwise to increasethe volume level. The volume can
be adjusted manually and by the remotecontrol transmitter's
Volume up/down ( A ,
Headphone jack (PHONES)
Stereo headphones with a standard binaural plug can be
connected here. No sound will be output to the speakerswhen
headphones are connected to this jack.
Adjust Button (ADJUST)
use this button to adjust the current time. Referto the section
"How to Set the Current Time" for details. (Refer to page 10.)
@ Program Button (PROGRAM)
Use this button for "time reservation". Referto the section
"How to Set the Timer Reservation"for details. (Refer to page
11.)
[9) Timer Stand-by Button (TIMER STAND-BY)
Press this button to cancel the -timer reservation"
FM Mode Button (AUTO/MONO)
When the mode button is set to AUTO. the
lights and FM stereostationreceptionis enabled.
When the FM stereo reception is weak and noisy, pressthe
mode button and the
indicator will come on, and noise-free monaural re-
ception will be enabled. The
(Thismodeoperationcanonlybeusedfor FMreception.)
[jj Memory Button (MEMORY)
Pressthis button to register a station in memory.This button
is also used for setting the time or for making a timer setting.
(Refer to pages 9, 10 and II
Preset/Tuning/Time Set Button
( DOWN/UP
• This is used to select the preset stations (up to 30 stations)
to be used from the memory. (Refer to page 9 for "Memory
Function". )
• Pressing the DOWNbuttonwill decrease t hefrequency
beingreceived,and pressingthe UP
crease the frequency. Pressing either button for more than
0.5 seconds and then releasing it will cause the frequency
to change automatically until it picks up a station.
disc player.
) button.
indicator
indicator will go off. The
indicatorwill go Off.
)
button Will in-
• These buttons are also used to move the time ahead or back
when setting the time or setting on the timer.
Remote Control Transmitter
Sleep button (SLEEP)
Pressto set the power off timer. The sleep timer is a function
which turns off the power to the system from the time it is set.
Refer to the section "How to Operate the Sleep Timer" for
details. (Refer to page 10.)
CD Operation Buttons (CD)
These buttons are used to operate the C- 100 ONKYO CD player.
. Press this button to stop the CD player.
. Press this button to pause the CD play back.
11
To resume disc play, press the PLAY button.
Press this button
• mess this button to go back to the beginning
Of the current track and again to skip back to
the previous track.
Press this button to skip to the next track.
Press these buttons
grama track numberinto memory. P ress+10
button to select or program a track with a track
number of 10 or higher. For example, to select
Track Number 30, press this button three times,
and then press O.
Referto the CD player instruction manual for additional in-
formation.
Tape Operation Buttons (DECK)
These buttons are used to operate the K-IOO ONKYO cassette
tape deck.
The tape plays, moving from right to left, or, in the re-
cording stand-by mode, recording begins.
: Interrupts all operations.
• The tape plays, moving from left to right, or, in the re-
cording stand-by mode, recording begins.
WII : When this is pressed,the recording stand-by mode is
entered. (Only Deck-B)
: Fast forward from right to left.
: Fast forward from left to right.
Tuner Operation Buttons (
When the up ( ) or down (
higher or lower memorychannel is recalled. Eachtime up or
down button is pressed.the following memorychannel in the
corresponding direction is recalled. If the button is held down
the memorychannel will increase or decreasecontinuously
until button is released.
Bass Control Buttons (BASS)
Treble Control Buttons (TREBLE)
The remote control transmitter can be used to carry out tone
(treble andbass)control.This canbe adjustedby pressingthe
up( A ) ordown( V ) buttonfor eitherthe Bass orTreble.
—12)areavailablefor both the Bassand Treble
13 (+12æ
controls. O is used for a flat setting.
• Thepreviouslyselected sourcewill bedisplayedapprox.5
seconds after the up or down button is released.
• The DIRECT function will be cancelled
the bass or treble button is pressed.
Direct Button (DIRECT)
When you select DIRECT,you can obtain a "pure" sound re-
production, by passing the bass, treble, processorand using
control. The
lights up.
Audio Muting Button (MUTING)
This button temporarily switches off the sound from the
speakersor headphones. Pressingthis button will operate the
R-100's audio muting circuit, and the
will come on. Pressingthe button again will turn off the audio
muting function. The sound can also be turned on again by
pressing the volume button.
Controls RC-174S
to play the CD player.
for a Direct Play or to pro-
PRESET )
) button is pressed,the next
automatically when
the display
indicator